192.168.1.1
Huawei Network Equipment

Huawei Router Login

Access your Huawei router at 192.168.1.1, 192.168.100.1, or 192.168.8.1. Complete login guide with default credentials (admin/admin), configuration steps for all Huawei router models including HG8245H, HG8546M, B593, and EchoLife series.

192.168.1.1 (Primary)192.168.100.1 (Fiber)192.168.8.1 (Mobile)

What is Huawei Router Login?

Huawei router login provides access to your Huawei router's admin interface at 192.168.1.1, 192.168.100.1, or 192.168.8.1. Most models use default username admin and password admin. Fiber models (HG8245H) may use different credentials like telecomadmin/admintelecom or root/admin.

HG8245H

Fiber ONT

192.168.100.1

HG8546M

Fiber Router

192.168.1.1

B593

4G LTE Router

192.168.8.1

How to Login to Huawei Router

1

Connect to Huawei Router

Connect via WiFi or Ethernet cable. For initial setup, use wired connection. Default WiFi name and password are on router label (bottom or back panel).

2

Open Browser & Enter IP Address

Open web browser and enter IP address:

http://192.168.1.1http://192.168.100.1http://192.168.8.1

Standard routers use 192.168.1.1. Fiber ONT (HG8245H) uses 192.168.100.1. Mobile routers (B593) use 192.168.8.1.

3

Enter Login Credentials

Try these common Huawei default credentials:

Standard Models:

Username: admin

Password: admin

Fiber ONT (HG8245H):

Username: telecomadmin or root

Password: admintelecom or admin

Check router label for exact credentials. Some ISP models have unique passwords.

4

Access Admin Panel

Successfully logged in! Configure WiFi settings, change passwords, manage devices, and adjust network settings from the admin panel.

Security Warning

Change default password immediately after first login. Use strong password (8+ characters, mixed case, numbers, symbols).

Troubleshooting Huawei Router Login

Cannot Access 192.168.1.1

If login page won't load:

  • • Try all IP addresses: 192.168.1.1, 192.168.100.1, 192.168.8.1
  • • Verify connection to Huawei router (check WiFi name)
  • • Use http:// not https:// in URL
  • • Clear browser cache or use incognito mode
  • • Disable VPN/proxy if active
  • • Try different browser (Chrome, Firefox, Edge)
  • • Use Ethernet cable instead of WiFi
  • • Restart router: unplug 30 seconds, plug back

Find Router IP: Windows CMD → ipconfig → Default Gateway. Mac → System Preferences → Network → Router.

Wrong Password or Forgot Login

Common Huawei default credentials:

Try these combinations:

1. admin / admin

2. telecomadmin / admintelecom

3. root / admin

4. admin / Admin@huawei

5. user / user

Factory Reset: Press and hold RESET button (small hole on back) for 10-15 seconds with paperclip. All settings will be erased.

How to Factory Reset Huawei Router

  1. Locate RESET button (small recessed hole on back/bottom)
  2. Use paperclip or pin to press and hold button
  3. Hold for 10-15 seconds until lights blink
  4. Release when lights flash rapidly
  5. Wait 2-3 minutes for router to restart
  6. Login with default credentials from router label

Warning: Factory reset erases ALL settings: WiFi name, password, admin password, port forwarding, and custom configurations.

LED Light Status Guide

Understanding Huawei router indicators:

Solid Green:Connected to internet, working normally
Blinking Green:Data transmission in progress
Red/Orange:No internet connection or error
Blinking Red:Hardware failure or firmware issue
Off:Power off or cable disconnected

Popular Huawei Router Models

ModelTypeIP AddressDefault Login
HG8245HFiber ONT192.168.100.1telecomadmin/admintelecom
HG8546MFiber Router192.168.1.1admin/admin
B5934G LTE Router192.168.8.1admin/admin
EchoLife HG520sADSL Router192.168.1.1admin/admin

Frequently Asked Questions

What is the IP address for HG8245H Huawei ONT?

HG8245H fiber ONT uses 192.168.100.1. Default login is telecomadmin/admintelecom or root/admin. Some ISPs customize credentials - check device label.

How do I reset my Huawei router password?

Factory reset required if password forgotten. Press and hold RESET button (small hole on back) for 10-15 seconds with paperclip. Router resets to default admin/admin. All settings will be erased.

What lights should be on my Huawei router?

Normal operation: Power (solid green), PON/LOS (solid green for fiber), LAN (green when connected), WiFi (green when active). Red lights indicate connection problems. Blinking green shows data transmission.