Tenda Router Login
Access your Tenda WiFi router at 192.168.0.1 or tendawifi.com. Complete setup guide with default passwords, configuration steps, and troubleshooting tips.
What is Tenda Router Login?
Tenda router login provides access to your router's web-based admin interface at 192.168.0.1 or tendawifi.com. Most Tenda routers use default username admin and password admin. Some models may have blank credentials (leave username/password empty and click submit).
AC Series
AC6, AC9, AC10, AC1200
N Series
N301, N300, N150
F Series
F3, F6, F9
Note: Most Tenda routers use 192.168.0.1 as default IP. Some models may use 192.168.1.1 or other addresses.
How to Login to Tenda Router
Connect to Tenda Network
Connect via WiFi or Ethernet cable. For first-time setup, wired connection is recommended. Default WiFi name (SSID) is usually Tenda_XXXXXX with password printed on router label.
Open Browser & Enter Address
Open any web browser and enter one of these addresses:
http://192.168.0.1http://tendawifi.comhttp://192.168.1.1Enter Default Credentials
Enter the default login credentials:
Option 1 (Most Common):
Username: admin
Password: admin
Option 2 (Some Models):
Leave both username and password blank and click Submit
Check router label if these don't work. Credentials are case-sensitive.
Access Admin Dashboard
Successfully logged in! You'll see the Tenda admin interface. Configure WiFi settings, security options, parental controls, and firmware updates from here.
Security Tip
Always change the Default admin Password after first login to prevent unauthorized access. Choose a strong password with letters, numbers, and special characters.
tendawifi.com vs 192.168.0.1
Both tendawifi.com and 192.168.0.1 lead to the same login page. The domain name is easier to remember, while the IP address works even if DNS resolution fails.
Using tendawifi.com
- •Easy to remember
- •User-friendly URL
- •Works on most browsers
- •Official Tenda domain
Using 192.168.0.1
- •Works without DNS
- •More reliable connection
- •Direct IP access
- •Faster loading
Can't Access Tenda Router? Troubleshooting
192.168.0.1 or tendawifi.com Not Working
Common solutions if login page won't load:
- •Check connection - Ensure you're connected to Tenda WiFi network
- •Try alternative IP:
192.168.1.1or192.168.2.1 - •Clear browser cache and cookies
- •Disable VPN or proxy if active
- •Try different browser (Chrome, Firefox, Edge)
- •Use incognito/private mode
- •Verify router is powered on (check LED lights)
Find Your IP: On Windows, open CMD and type ipconfig. Look for "Default Gateway" under your network adapter.
Wrong Password or Forgot Password
Try these default credential combinations:
•Username: admin | Password: admin
•Leave both fields blank and click Login/Submit
•Username: admin | Password: (blank)
•Check router label for specific credentials
Note: Credentials are case-sensitive. If you changed the password and forgot it, you'll need to perform a factory reset.
Factory Reset Tenda Router
If you can't login with any default credentials, perform factory reset:
- Locate the RESET button (small hole on back of router)
- Use a paperclip or pin to press and hold for 7-10 seconds
- Keep holding until LED lights blink
- Release button and wait for router to restart (1-2 minutes)
- Login with default credentials: admin/admin or leave blank
⚠️ Warning: Factory reset erases ALL custom settings including WiFi name, password, port forwarding, QoS settings, and parental controls. You'll need to reconfigure everything.
Connection & Network Issues
- •No WiFi signal: Check if router is powered on, try restarting it
- •Connected but no internet: Check WAN cable connection to modem
- •Slow speeds: Too many connected devices, try QoS settings
- •Can't ping 192.168.0.1: IP conflict or wrong network
- •Power cycle: Unplug router → Wait 30 seconds → Plug back in
Settings You Can Configure
WiFi Settings
- •Change WiFi name (SSID)
- •Update WiFi password (WPA key)
- •Enable/disable guest network
- •Switch 2.4GHz/5GHz bands
- •WiFi channel selection
Security
- •Change admin login password
- •WPA2/WPA3 encryption
- •Firewall settings
- •MAC address filtering
- •Remote management control
Network Management
- •View connected devices
- •DHCP server settings
- •Port forwarding/triggering
- •Dynamic DNS (DDNS)
- •Static IP reservation
Advanced Options
- •Parental controls & scheduling
- •QoS (bandwidth prioritization)
- •Firmware updates
- •VPN setup (if supported)
- •System logs & diagnostics
Frequently Asked Questions
What is the default password for Tenda router?
Connect to your Tenda WiFi network, open a web browser, and go to 192.168.0.1 or tendawifi.com. Enter username admin and password admin (or leave both blank for some models). You'll access the admin dashboard where you can configure all settings.
Why is 192.168.0.1 not working?
Common reasons: (1) Not connected to Tenda router's WiFi, (2) Router uses different IP like 192.168.1.1, (3) Browser cache issues - try incognito mode, (4) VPN is enabled - disable it, (5) IP conflict. Check your Default Gateway in network settings to find the correct IP address.
What is tendawifi.com and is it safe?
Yes, tendawifi.com is the official domain provided by Tenda for easy router access. It redirects to your router's local IP address (192.168.0.1). It's completely safe and only works when you're connected to your Tenda network. It's simply an easier-to-remember alternative to typing the IP address.
How do I reset my Tenda router to factory settings?
Locate the small RESET button (usually a hole) on the back of your router. Use a paperclip or pin to press and hold it for 7-10 seconds until the LED lights blink. Release and wait for the router to restart. This restores default settings including admin/admin credentials, but erases all your custom configurations.
Can I access Tenda router from my phone?
Yes! Connect your phone to Tenda WiFi, open your mobile browser (Chrome, Safari, etc.), and go to 192.168.0.1 or tendawifi.com. The interface is responsive and works on mobile devices. Some Tenda routers also have a dedicated mobile app available on App Store and Google Play for easier management.