ZTE Router Login
Access your ZTE router at 192.168.1.1 or 192.168.0.1. Complete login guide for F609, F660, F668, and MF series with default passwords and configuration steps.
What is ZTE Router Login?
ZTE router login provides access to your router's web-based admin interface at 192.168.1.1 or 192.168.0.1. Most ZTE routers use default username admin and password admin. Some ISP-provided models may have blank credentials or custom passwords printed on the router label.
F Series (FTTH)
F609, F660, F668, F680
MF Series (4G/5G)
MF283, MF286, MF920
H Series
H108N, H267A, H298A
Note: ZTE F609, F660, F668 (fiber routers) commonly use 192.168.1.1. Check your router label for the exact IP address and credentials.
How to Login to ZTE Router
Connect to ZTE Network
Connect via WiFi or Ethernet cable to your ZTE router. For initial setup, wired connection is recommended for stability. Find default WiFi name (SSID) and password on the router label (usually on bottom or back).
Open Browser & Enter IP Address
Open any web browser (Chrome, Firefox, Edge, Safari) and enter one of these IP addresses:
http://192.168.1.1http://192.168.0.1http://192.168.2.1Make sure to type http:// before the IP address for best results.
Enter Default Credentials
Try these common ZTE default login credentials:
Option 1 (Most Common):
Username: admin
Password: admin
Option 2 (Some Models):
Username: user
Password: user
Option 3 (ISP Models):
Leave both fields blank or check router label
Credentials are case-sensitive. ISP-provided routers often have custom passwords on the label.
Access Admin Dashboard
Successfully logged in! You'll see the ZTE router web interface. From here you can configure WiFi settings, change passwords, set up security, manage connected devices, and update firmware.
Security Recommendation
After first login, immediately change the Default admin Password to prevent unauthorized access. Use a strong password with at least 12 characters combining letters, numbers, and symbols.
Common ZTE Router Default Credentials
Different ZTE models may use different default credentials. Here are the most common combinations:
| Model Series | Default IP | Username | Password |
|---|---|---|---|
| F609, F660, F668 | 192.168.1.1 | admin | admin |
| MF283, MF286 | 192.168.0.1 | admin | admin |
| H108N, H267A | 192.168.1.1 | user | user |
| ISP Custom Models | varies | Check label | Check label |
Can't Access ZTE Router? Troubleshooting
192.168.1.1 Not Loading
If the login page doesn't load, try these solutions:
- • Try all IP addresses: 192.168.1.1, 192.168.0.1, 192.168.2.1
- • Verify connection to ZTE router (check WiFi name)
- • Use http:// not https:// in URL
- • Clear browser cache or use incognito/private mode
- • Disable VPN or proxy if active
- • Try different browser (Chrome, Firefox, Safari)
- • Use Ethernet cable instead of WiFi
- • Restart router: unplug 30 seconds, plug back in
Find Router IP: Windows CMD → ipconfig → Default Gateway. Mac → System Preferences → Network → Router.
Wrong Password or Forgot Login
If default credentials don't work:
- • Check router label for exact credentials
- • Try admin/admin combination
- • Try user/user combination
- • Leave username and password blank
- • Contact ISP for custom credentials
Factory Reset: Press and hold RESET button (small hole) for 7-10 seconds with paperclip until lights flash. All settings will be erased.
Factory Reset Instructions
- Locate RESET button (small recessed hole on back)
- Use paperclip or pin to press and hold button
- Hold for 7-10 seconds until lights flash
- Release when lights blink rapidly
- Wait 2-3 minutes for router to restart
- Login with default credentials (admin/admin)
Warning: Factory reset erases ALL settings: WiFi name, password, admin credentials, port forwarding, and all custom configurations.
Common Configuration Tasks
After logging in, you can configure:
WiFi Settings
Change WiFi name (SSID) and password
Security
Set WPA2/WPA3 encryption and firewall
Admin Password
Change Default admin Password
Parental Controls
Block websites and set access times
Guest Network
Create separate network for visitors
Firmware Update
Update router software for security
Advanced Configuration Options
Advanced users can access these features:
- • View connected devices list
- • DHCP server settings
- • Port forwarding/triggering
- • Dynamic DNS (DDNS) setup
- • Static IP address assignment
- • LAN IP configuration
Advanced Options
- • Parental controls & access scheduling
- • QoS (bandwidth management)
- • Firmware updates & backup
- • VPN passthrough settings
- • NAT configuration
- • System logs and diagnostics
ZTE F609 / F660 / F668 Login Guide
These popular ZTE fiber (FTTH) routers are commonly provided by ISPs. Here's specific information for these models:
Default Access Info
- • IP Address:
192.168.1.1 - • Username: admin or user
- • Password: admin or user
- • Some ISPs use custom credentials
Common ISP Credentials
- • Check router label sticker
- • Contact your ISP support
- • Look in ISP documentation
- • Try user/user combination
Superadmin Access: Some F609/F660 models have a hidden superadmin account. This is typically only needed for advanced configuration. Contact your ISP for superadmin credentials if regular admin access is insufficient.
Frequently Asked Questions
What is the default password for ZTE router?
Most ZTE routers use username admin and password admin. Some models use user/user. ISP-provided routers may have custom credentials printed on the router label. Always check the sticker on the bottom or back of your router first.
How do I login to my ZTE F609 or F660 router?
Connect to your ZTE router's network, open a browser, and go to 192.168.1.1. Enter username admin and password admin. If that doesn't work, try user/user or check the credentials on your router's label. ISP-configured routers may have different login details.
Why can't I access 192.168.1.1 on my ZTE router?
Common reasons: (1) Not connected to ZTE router's network, (2) Router uses a different IP like 192.168.0.1 or 192.168.2.1, (3) Browser cache issues - clear cache or use incognito, (4) VPN is active - disable it, (5) Firewall blocking access. Find your router's IP by checking the Default Gateway in your network settings.
How do I reset my ZTE router password?
If you forgot your ZTE router password, you need to perform a factory reset. Press and hold the RESET button (small hole) on the back for 7-10 seconds using a paperclip until lights flash. Wait for router to restart, then login with default credentials: admin/admin. Note: This erases all settings including WiFi configuration.
What is the ZTE F660 superadmin password?
The superadmin account on ZTE F660/F609 routers is typically only accessible with credentials provided by your ISP. This account has full access to all advanced settings. Contact your Internet Service Provider's technical support to obtain superadmin credentials if needed for specific configurations.
Can I access ZTE router from my phone?
Yes! Connect your phone to ZTE router's WiFi, open your mobile browser (Chrome, Safari, etc.), and navigate to 192.168.1.1 or your router's IP address. Enter login credentials and you'll access the same web interface. The mobile interface is responsive and works well on smartphones and tablets.